| Customization: | Available |
|---|---|
| After-sales Service: | Good Service and Installation Guidance |
| Material: | Steel Structure |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
I believe that many small partners should have seen what a Cabin Kits is, and have an understanding of the fast, efficient, environmentally friendly, and economical characteristics of Cabin Kits. So, how many small partners are very familiar with the installation steps of Cabin Kits? I believe that many of the little friends will be proud of their heads at this time, and it seems that they are lost in thought. Don't worry, today, the editor Edwin will bring you a luxurious explanation like a feast of the sea and the sky, so that you can understand it as soon as you hear it, and understand it at a glance.
When assembling a Cabin Kit, the first step is to put the Cabin Kit on a flat floor of cement or any other material. The key must be flat, because after all, this is a house, and most the houses still need to be stable. . The two long beams and the two short beams are placed on the ground to form a regular rectangle. Then, they are connected with corner heads, and the four beams and the corner heads are connected together with screws.
The second step is to install four corner posts, each of which is vertically downward, installed on the corresponding corner head, and then fixed from the inside with screws. Note that the screws are fixed from the inside, which is an advanced upgrade point for us in the field of Cabin Kits, because this way the screws are not exposed to the outside environment, reducing the risk of corrosion. Another point, probably a joke, is that you don't have to worry about the screws being stolen. Ahaha, are you laughing?
The third step is to start installing the top purlins. Each purlin can be connected with screws according to the holes we have fixed on the beam.
The fourth step is to install the bottom frame and bottom plate. That is, put a cement board or glass magnesium board on the bottom purlin. Here I need to focus on advertising our factory. There were only nine purlins at the bottom of our Cabin Kits. Later, considering that the customer will put more pressure on each square meter in the actual use process, we increased the amount without increasing the price and upgraded the bottom purlins. Nine purlins have been upgraded to the current sixteen purlins, which greatly improves the pressure-bearing capacity of each square meter of the bottom. I need to explain that the bottom bedding board is the two kinds of boards we commonly use now, cement board and glass magnesium board. In general, we use more cement boards in the environment with water such as in toilets, and in a normal environment, we use cement boards. There are many customers of glass magnesium board.
You will not have the feeling of a house in the first four steps. When the fifth step starts to install, you will soon find that the feeling of the house is coming. After the 950*2530 wall panels are installed together, you will soon have a feeling that you want to stand inside and feel it. Under normal circumstances, the wall panels are almost installed by two workers in less than ten minutes.
The sixth step begins to install the doors and windows. Our doors are 950mm wide and two meters high. The door is fastened to the door beam by hinges and screws. The window is installed in the hollow of the sandwich panel in the dug position. We often use plastic-steel doors, and windows are glass-plastic-steel windows plus anti-theft guardrails.
The seventh step is to lay glass wool on the top purlins and then cover them with roof tiles. Install roof tiles under the purlins. Structural adhesive will be applied to each screw fixing. All gaps in the house will be sealed with sealing strips, and then sealed with sealant. The entire Cabin Kit is airtight under this treatment, and the waterproof performance is very good.
Then, put your furniture into it, and you can move in directly without worrying about any environmental protection issues. The whole house is made of green environment-friendly building materials, and the installation process has zero loss and is very environmentally friendly.
| size | Type | Container House |
| Unit Area | 18m² | |
| Length | 6m | |
| Width | 3m | |
| Height | 2.8m | |
| Floor System | Steel frame | 3mm Galvanized Steel for the main structure + 1.5mm square tube for the secondary beam |
| Floor | 15mm MGO board + PVC leather floor | |
| Roof System | Steel frame | The steel frame is Q235 galvanized fitting; |
| Roof insulation | The ceiling is steel pre-coated 0.4mm outside strong steel sheet; | |
| With 50mm glass wool insulation material; | ||
| Roof ceiling | The ceiling is shaped steel plate with different pattern | |
| Column System | Column | 2.5mm Shaped Galvanized Steel |
| Sandwich Wall System | Wall Panel | 50mm Sandwich Panel ; |
| The outside color is light silver-gray (0.35mm thickness steel ); | ||
| Inside is white color steel (0.35mm thickness steel ). | ||
| Door & window system | Door | Material: Steel door |
| Size: 2000*980mm(H*W) | ||
| Window | Material: Aluminum alloy steel double hollow glass sliding window (including screens) | |
| Size:1200*1000mm(H*W) | ||
| Electric system | Includes ordinary LED light, A-SW double sockets 2 sets, A-SW air-switch 2 sets, | |
| Electrical box with safety protection device connecting cable for connecting; | ||
| Accessories | Electric wire; sealant; wiring tube; screws and other accessories. | |
We have a business license approved by the Chinese government to operate legally. CE certificate conforming to EU standards, SGS certificate passed globally and CQM certificate qualified by third-party agency inspection, etc. Quality clearance, legal operation, rest assured to buy, the purchase is guaranteed.
After the factory production is completed, we will clearly mark the various parts of the container house in English, so that you can identify them when you pick up the goods. Then, use cranes and forklifts to load the marked container house parts into shipping boxes, and we will take a lot of photos and send them to you during the factory loading so that you can clearly grasp the progress of the goods. The shipping box driver will move the cargo to the port, and then, send it to your receiving port.
We will provide you with a detailed installation know-how video and installation manual. If you don't understand something during the construction period, we will provide you with the full installation online know-how service. If you need our engineer to go to the installation site to guide the installation, you need to pay the engineer's round trip fee, room and board, visa fee, and salary. At the same time, we also have a professional overseas installation team that can help you arrange.
Henan K-home Steel Structure Co., Ltd is located in Xinxiang, Henan Province. It is a self-operating private enterprise, established in the year of 2007, registered capital of RMB 20 million, covering an area of 100,000.00 square meters with 260 employees. We are engaged in the design, project budget, fabrication, and installation of steel structures and sandwich panels with second-grade general contracting qualifications. Our main products covered sandwich panels, OEM prefab houses, container houses, construction materials, light steel structure houses, light steel villas, non-standard design houses, steel structure projects, and installation services.
1. What is the size of your steel structure house?
We customize according to the actual usage of customers.
2. Can your price be more favorable?
We develop based on the business philosophy of quality and service first, so the price of our container houses will not be falsely reported. Maybe, when you order in large quantities, we can appropriately save some labor costs and reduce the single price of your container house.
3. How to guarantee after-sales service?
As a factory that has been operating for decades, many of our orders are based on returns from old customers, so we attach great importance to our customer feedback.
4. Can various matching furniture or electrical appliances be customized?
Yes. We can customize all kinds of furniture and electrical appliances for you in China according to your needs, which may be lower in price and better quality than what you can buy locally.
5. How long is the service life of your steel structure?
Under normal use, at least 50 years.
){kind=link}