Cheap Flat Pack Modular Container Homes Australia From China
Container House Australia answers any requirement in temporary building area
The flat pack container homes are developed from the shipping container reform. With decades years of research, our container units are upgraded in 5 aspects in order to realize a better but cheaper choice in temporary building area. Prefab container homes Australia provides an economical, efficient, and eco friendly living choice, no matter what kind of application will you use for or which geographies condition will the unit locate in.
Orderly drainage system
We use a 20 mm higher purlin in the middle to create a slope on the roof, the rain will be guided in four direction into the water channels around, then goes down through the drainpipe in the 4 corner columns. If the rainfall in your area Especially large, we can also put a girder beam on the roof to increase the roof slope for faster drainage.
Corner head design
The joints of the 8 corner heads around the house are all involved in the inner side. After the installation is completed, no nails can be seen from the outside, which avoids rusting from the source. There is also a hoisting space on each corner head, you can easily hoist the entire portable container home directly with a crane.
Steel structure
We have upgraded the thickness and quantity of the steel frame structure, and improved the spraying process of the steel surface, which not only achieves the purpose of anti-scratching, but also has excellent waterproof and rust-proof ability.
Sealing design
Three sealing solutions upgraded against wind and rust.
The sealing strip stuff between wall panel and ground beams; the butyl tape cover on the gap of two connected containers; the sealing glue and structural adhesive glue on each joint and every screw exposed.
Packaging method.
We use the flat pack solution instead of shipping the installed container.
Some basic information in detail for your reference
The steel structure of container house Australia
A standard modular container home measures 5.95 meters length, 3 meters width, 2.8 meters height. The main frame is made by light steel structure, including 4 floor beams, 4 roof beams,4 corner columns, 8 corner joints (with hoisting holes), 14+30 floor purlins and 5+3 roof purlins. The increased thickness and quantity ensure your home a longer service life and safer stability.
The insulation for container homes australia
The insulation we use at present exists in three materials: Glass Wool, Rock Wool, and PU.
The Glass Wool material uses glass as the main raw material and mix with various other auxiliary materials in a certain proportion, and possesses light density, low thermal conductivity, large absorption coefficient, and good flame retardant performance. Generally, it is used as the insulation material on the roof structure for heat preservation. The maximum suitable temperature is 350 degrees and the fireproof resistance is A class (No flame within 20 minutes, leave enough escape time when there is a fire).
The commonly used thickness is 50 mm, 75 mm, 100 mm with color in Blue, Red and White Gray.
The Rock Wool uses refined basalt as the main raw material, then add special binder and dustproof oil, and possesses Good adiabatic performance, Excellent sound insulation and sound absorption performance. Generally, it is put in double 0.4 mm steel plate as the insulation material, and these sandwich panel envelop the containers homes australia between the main beams and columns. The maximum suitable temperature is 350 degrees and the fireproof resistance is A + class (No flame within 20 minutes, leave enough escape time when there is a fire).
The commonly used thickness is 50 mm, 75 mm, 100 mm with color in Blue, Red and White Gray. The thickness of steel plate on both sides ranges 0.38-0.7 mm.
The PU sandwich panels are suitable for industrial and commercial buildings with a roof slope of 3%. Self-cleaning high-grade panels reduce the amount of ash deposited on the roof and keep the roof of the building permanently crystallized. The high wave crest improves the bearing capacity of the roof panel. It has the characteristics of large span, fast drainage and convenient installation. The lap joint is designed with hydrodynamics to ensure fast installation, air tightness and good capillary water seepage prevention effect.
Energy saving and heat preservation, the closed cell ratio of the core material is greater than or equal to 97%, and the thermal insulation performance is superior; flame retardant and fireproof, the combustion grade reaches the B-level standard; airtight sound insulation, good sound absorption, and can reduce the sound caused by the impact of rain, hail, etc. ; Green and environmentally friendly, free of formaldehyde, free from microbial invasion, and recyclable; beautiful and economical, with various surface forms and rich colors; reducing material loss, saving construction time and engineering costs; fast construction, polyurethane panels are highly controlled in the factory, Produced in a constant temperature environment, with stable quality and fast construction, it has been used for more than 35 years.
* The EPS is forbidden now because it is not fireproof.
FAQs
Are the container homes Australia prices cheap?
Yes, definitely. The affordable container homes australia cost is $150/sqm, much cheaper than the permeant building with a service life 15-20 years. Besides, the flat pack transport solution minimize the shipping cost. The price of a container house covers every preparation work cost, this kind of flat pack container house can be put into use once the installation is ready. There is no need for any secondary renovation work using large machinery like the other house choices.
How long do container homes last?
Generally, our container kit homes Australia has a service life at least 15 years and up to more than 20 years. Benefiting its eco friendly advantage, most parts can be recycled after disassembling. The coating can ensure that the surface of the house is not prone to scratches, so you only need to repaint it once every three years to extend its service about 20 years.
How to transport container house australia from China?
One 40ft shipping container can hold 11 sets of standard flat pack container houses. Instead of shipping the whole units installed, the shipping costs can be minimized by transporting the components and installation on site. The assembly and disassembly are easy and fast to achieve. Only 4 workers can accomplish 130 m2 installation in 1 day (3 of our skilled workers can install 2 units in one day).
Audited Supplier 
){kind=link}