| Customization: | Available |
|---|---|
| After-sales Service: | Perfect Service and Installation Guidance |
| Layers: | Single-Layer |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Steel Structure Workshop Galvanized Steel Factory
Steel Structure Workshop Galvanized Steel Factory are relatively common in current construction, and many companies also use this type of material in factory construction.
1. Wind resistance of steel structure:
Steel Structure Workshop Galvanized Steel Factory are light in weight, high in strength, good in overall rigidity and strong in deformation ability. The building's self-weight is only one-fifth of that of a brick-concrete structure, and it can withstand hurricane winds of 70 meters per second, so that life and property can be well protected.
2. Steel structure durability:
The light steel structure warehouse factory is all composed of cold-formed thin-walled steel component systems. The steel frames are made of anti-corrosion cold-rolled galvanized sheets to avoid the impact of corrosion of steel sheets during construction and use and increase the service life of light steel components. The structural life can reach 100 years.
3.Seismic resistance of steel structure:
Most of the roofs of low-rise villas are sloped roofs, so the roof structure basically uses a triangular roof truss system made of cold-formed steel components. After the light steel components are sealed with structural plates and gypsum boards, they form a very strong " "Plate-rib structural system", this structural system has stronger ability to resist earthquakes and horizontal loads, and is suitable for areas with seismic intensity above 8 degrees.
4. Steel structure health:
Dry construction reduces environmental pollution caused by waste. The steel structure materials of the house can be recycled, and most of the other supporting materials can also be recycled, which is in line with the current environmental awareness; all materials are green building materials, meet environmental requirements, and are beneficial to health.
5. Sound insulation of steel structure:
Sound insulation effect is an important indicator for evaluating residences. The windows installed in the light steel system are all made of insulating glass, which has good sound insulation effect, with the sound insulation effect reaching more than 40 decibels. The sound insulation effect of the wall composed of light steel keel and insulation material gypsum board can be as high as 60 decibels.
6. Steel Structure Workshop Galvanized Steel Factory thermal insulation:
The thermal insulation material used is mainly fiberglass wool, which has good thermal insulation effect.
Customized Portal Steel Structure Form
The portal frame structure comes in several shapes, including single-span, double-span, high-low-span, and multi-span, with options such as a single ridge, multiple ridges, single slope, double slope, and multiple slopes. Single-span frames are commonly used in buildings that don't need much lateral space and have spans ranging from 18 to 36 meters. The beams and columns of these frames are usually made of welded or rolled H-shaped sections and are positioned and adjusted in height based on the span and the bending distance diagram. The multi-span rigid frame is ideal for large buildings, with a similar cross-section to the single-span rigid frame but with a center column that typically has an equal cross-section.
Main Parts Of Steel Structure Shop Buildings Construction
The Composition of Steel Frame
Steel buildings are strong and reliable. Its main stress-bearing frame consists of steel columns, roof beams and support systems. This main frame provides a stable foundation for the building. In the structure, roof panels and wall panels not only play the role of enclosure and closure, but also increase the overall stiffness. At the same time, roof purlins and wall beams also play a very important role. They not only support the roof and walls, but also provide lateral support for the beams and columns of the main structure, forming a secondary frame to further enhance the stability of the entire building.
Metal Shop Buildings Advantages
Color steel sheets, also known as colorful pressure tiles are color-coated steel plates, and they are bent coldly into various wave types.
FRP sheets are usually used for the top or walls of the building. They have high transparency and can provide sufficient natural light to save energy and environmental protection.
In architectural design, color steel sheet Roof and FRP sheet can be supplemented and cooperate with each other.
2,Glass Wool + Color Steel Roofing Sheet
The roof composed of glass cotton and colored steel plates can have a certain heat insulation and insulation effect.
3,Sandwich Roof Panel
Sandwich roof panels are a type of roofing system that consists of two metal sheets that are bonded to a core material. The core material is usually made of insulation material such as polyurethane foam or rock wool. Sandwich roof panels have numerous benefits, including high thermal insulation, excellent fire resistance, and ease of installation.
Wall Treatment Method for Metal Shop Buildings
The following two wall construction methods are relatively common and have relatively high cost performance.
These two methods only need to be fixed with screws, which is very simple and convenient. This will save you costs, including labor costs, material costs and time costs.
Panel coverage options
Covering panel options for metal storage buildings, common choices include color steelsheets and sandwich panels.
Color steel sheets have high weather resistance and corrosion resistance, and can maintain good use condition for a long time under various climate conditions. It is light in weight, easy to carry and install, has a relatively high-cost performance, and saves costs. In addition, color steel single tiles have a wide range of color and appearance options, which can meet different design requirements and make the appearance of the building more beautiful.
Sandwich panels are lightweight walls, consisting of two inner and outer metal plates and an insulating layer in the middle. They can effectively isolate the temperature difference between indoors and outdoors and provide good thermal insulation performance. Secondly, metal plates have high strength and rigidity, can withstand certain loads, and provide structural stability and durability.
If you need a One-stop solution at a great price point, choose a steel frame metal building from K-HOME. Metal is a top-notch choice because it resists damage due to moisture and insects, so it will securely store everything from expensive tools and equipment to raw building materials and more. Choose a steel frame building with lots of customization options from K-HOME. A broad range of sizes, footprints, and features are available to suit your vision and needs.
We have an excellent design team that can make perfect architectural drawings and construction drawings. So we can easily customize design and production according to your needs. K-HOME Steel Frames are better than the rest. k-HOME has been building prefab houses for over 30 years. There are a ton of options that are available for both the inside and outside, so customize the building to suit your purpose. The types and colors of the wall/roof panels can be customized.
Questionnaire
Below issues that are needed to make a solution.
3.1 Location (where will be built? ) _____country, area
3.2 Size: Length*width*height _____mm*_____mm*_____mm
3.3 wind load (max. Wind speed) _____kn/m2, _____km/h, _____m/s
3.4 snow load (max. Snow height)
_____kn/m2, _____mm
3.5 anti-earthquake _____level
3.6 brick wall needed or not If yes, 1.2m high or 1.5m high
3.7 thermal insulation If yes, EPS, fiberglass wool, Rockwool, PU sandwich panels will be suggested; If not, the metal steel sheets will be ok. The cost of the latter will be much lower than that of the former.
3.8 door quantity & size _____units, _____(width)mm*_____(height)mm
3.9 window quanity & size _____units, _____(width)mm*_____(height)mm
3.10 crane needed or not If yes, _____units, max. Lifting weight____tons; Max. Lifting height _____m
){kind=link}