| Customization: | Available |
|---|---|
| Layers: | Single-Layer, Single-Layer |
| Usage: | Dust-Proof Workshop, Electrostatic Workshop, Food And Chemical Industry, Heavy Industry, High-Voltage Power Plant, Research Facility, Specialized Workshop, Textile And Electronic Processing, Warehouse, Dust-Proof Workshop, Electrostatic Workshop, Heavy Industry, High-Voltage Power Plant, Research Facility, Specialized Workshop, Textile and Electronic Processing, Warehouse, Warehouse, Villa, Dormitories, Temporary Offices, Workshop, Factory, Sheds, Poultry House |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Steel Fabricated Storage Workshop Building Kits
Steel Fabricated Storage Workshop Building Kits is a structure required by many current factories. Its characteristics are convenient construction, fast speed and low weight. Corrosive gases not only affect steel structures, but also other structures. However, all steel structure factories will take anti-corrosion, fire prevention, rust prevention and other measures for the entire structure during the construction process. For special process plants, such as special chemical process plants, warehouse decoration, specifications, etc., there will be relevant regulations on the structure of the plant. The building can only be accepted after meeting these process requirements. In addition, because the construction steel has high strength, good plasticity, toughness, and high strength, it is suitable for construction. A structure with large span, high height and heavy load-bearing capacity. Commonly used knowledge in factories has good plasticity. Under normal conditions, the structure will not suddenly break due to overload, but will only increase deformation, so it is easy to be discovered. In addition, the local peak stress can be redistributed to make the stress changes gentle. It has good toughness and is suitable for working under dynamic loads, so it is more advantageous to use steel structures in earthquake areas.
1. Light weight
Steel has a large volume and high strength, but the structure is relatively light and can bear the same load at the same span. The weight of steel roof trusses is only 1/3~1/4 of reinforced concrete roof trusses at most, and cold-formed thin-walled steel roof trusses are even close to 1 /10. It is light in weight, which can reduce the load of the foundation and reduce the cost of the foundation part. It is also convenient for transportation and hoisting.
The material is uniform, and the mechanical calculation assumptions are more in line with the actual stress conditions of the steel structure. The engineering mechanics calculation structure is more in line with the material. The mechanical calculation assumptions are more in line with the actual stress conditions of the steel structure. The engineering mechanics calculation structure is more in line with the empirical formula used in the calculation. more, so the uncertainty in calculation is smaller and the calculation results are more reliable.
2. Easy to make and short construction period
Steel Fabricated Storage Workshop Building Kits parts are generally made in metal structure factories. The construction is mechanized, with high accuracy and precision, and the processing is simple and rapid. Steel components are lighter, simple to connect, easy to install, and have a short construction period. Small-volume steel structures and light-weight steel structures It can still be produced on site, and the simple hoisting steel structure is easy to reinforce, rebuild and demolish due to the connection characteristics.
3. Poor corrosion resistance and high painting requirements
Steel is easy to rust, so you must pay attention to the protection of steel structures, especially thin-walled components. The coating process of steel structures requires high requirements. Rust should be thoroughly removed before painting. The quality of the paint and the thickness of the coating should meet the requirements.
4. Good airtightness
The steel materials and connections (such as welding) of the steel structure have good water tightness and air tightness, and are suitable for plate and shell structures that require airtightness, such as high-pressure vessels, oil depots, gas tanks, pipelines, etc.
The Composition of Steel Structure Buildings
Pre-engineered steel buildings are custom designed to meet any industrial storage need.
Steel buildings are strong and reliable. Its main stress-bearing frame consists of steel columns, roof beams and support systems. This main frame provides a stable foundation for the building. In the structure, roof panels and wall panels not only play the role of enclosure and closure, but also increase the overall stiffness. At the same time, roof purlins and wall beams also play a very important role. They not only support the roof and walls, but also provide lateral support for the beams and columns of the main structure, forming a secondary frame to further enhance the stability of the entire building.
Free Professional Design
K-HOME is one of the largest steel structure building suppliers in China. We offer you a variety of durable prefabricated steel building kits. These steel buildings are designed to meet your every need.
You can contact us immediately to communicate with us and realize your metal steel structure construction ideas. We have rich experience and professional design software, which can provide you with one-stop service from engineering design, calculation, detail drawing, budget control, manufacturing, delivery and installation. Send us your requirements and our professional team can provide you with comprehensive advice.
Customized Industrial Steel Structure Kits
Steel structure buildings are customized products, and you can choose different steel frame forms and sizes. k-home can tailor different solutions for you according to your project.
Steel buildings are custom-made products and the maximum width depends on the roof load and the use of the building. At the same time, the span is also proportional to the slope of the roof. For general industrial buildings, the width of the clear span (space without columns) is 12 meters to 24 meters, and some spans are 30 meters to 50 meters. You can choose the width, length, and height of your building based on your project needs.
Steel Structure Frame Form
Depending on the span of the project, the structure chosen will be different.
Generally speaking, single-span structures are clear-span structures that do not require additional supports and connections and can maximize the use of space. In addition, installation and construction are relatively simple, and the building can be quickly completed.
If the building requires a long-span design, such as a span of more than 30 meters, a multi-span structure can provide better stability and load-bearing capacity. At the same time, it can be adjusted and expanded according to different layouts and needs, and is more suitable for places that require flexible changes, such as warehouse partitions, functional divisions, etc.
In general, when choosing a frame for a steel structure building, you need to consider the following factors:
If you want to know more information, you can contact us. We are able to conduct detailed technical assessment and analysis based on your specific needs and geographical conditions to provide you with the best options and design solutions.
Roof & Wall Treatment Method for Steel Structure Buildings
K-HOME offers a variety of roofing and wall treatments. Usually, considering the cost budget, using color steel sheets for walls and roofs is the simplest method. This method is sufficient to meet the daily operations of industrial buildings, and it is also cost-effective.
If you have further needs or have sufficient budget. You can also choose other wall and roof treatments.
The following is a more common approach:
1. Color steel sheet & FRP
Colored steel plate, also known as colored pressed tile, is a color-coated steel plate that is cold-bent and processed into various corrugated shapes. Color steel plates can be used as both roofs and walls.
FRP panels are often used on the top of buildings. They have high transparency, can provide sufficient natural light, save energy and be environmentally friendly.
In architectural design, color steel plate roofs and fiberglass plates can complement and cooperate with each other.
2. Sandwich panel
Sandwich shingles are composed of two metal sheets bonded to a core. The core is usually made from an insulating material such as polyurethane foam or rock wool. Sandwich panels offer many advantages, including high thermal insulation, excellent fire resistance and ease of installation.
Panel coverage options
Covering panel options for metal storage buildings, common choices include color steelsheets and sandwich panels.
Color steel sheets have high weather resistance and corrosion resistance, and can maintain good use condition for a long time under various climate conditions. It is light in weight, easy to carry and install, has a relatively high-cost performance, and saves costs. In addition, color steel single tiles have a wide range of color and appearance options, which can meet different design requirements and make the appearance of the building more beautiful.
Sandwich panels are lightweight walls, consisting of two inner and outer metal plates and an insulating layer in the middle. They can effectively isolate the temperature difference between indoors and outdoors and provide good thermal insulation performance. Secondly, metal plates have high strength and rigidity, can withstand certain loads, and provide structural stability and durability.
Industrial Prefabricated Steel Building Advantages
Compared with traditional concrete buildings, metal structure buildings use section steel instead of reinforced concrete, higher strength, and better seismic resistance. And because the components can be manufactured in factories and installed on-site, the construction period is greatly reduced. Due to the reusability of steel, it can greatly reduce construction waste and become more environmentally friendly. Therefore, it is widely used in industrial buildings and civil buildings all over the world.
Advantage:
1. Greatly save construction time. Construction is not affected by the season
2. Increase the use area of buildings, reduce construction waste and environmental pollution
3. Building materials can be reused, stimulating the development of other new building materials industries
4. Good seismic performance, easy to transform, flexible and convenient in use, bringing comfort and so on
5. High strength, lightweight, high safety and wealth of components, and lower building cost
If you need a One-stop solution at a great price point, choose a steel frame metal building from K-HOME. Metal is a top-notch choice because it resists damage due to moisture and insects, so it will securely store everything from expensive tools and equipment to raw building materials and more. Choose a steel frame building with lots of customization options from K-HOME. A broad range of sizes, footprints, and features are available to suit your vision and needs.
We have an excellent design team that can make perfect architectural drawings and construction drawings. So we can easily customize design and production according to your needs. K-HOME Steel Frames are better than the rest. k-HOME has been building prefab houses for over 30 years. There are a ton of options that are available for both the inside and outside, so customize the building to suit your purpose. The types and colors of the wall/roof panels can be customized.
Questionnaire
Below issues that are needed to make a solution.
3.1 Location (where will be built? ) _____country, area
3.2 Size: Length*width*height _____mm*_____mm*_____mm
3.3 wind load (max. Wind speed) _____kn/m2, _____km/h, _____m/s
3.4 snow load (max. Snow height)
_____kn/m2, _____mm
3.5 anti-earthquake _____level
3.6 brick wall needed or not If yes, 1.2m high or 1.5m high
3.7 thermal insulation If yes, EPS, fiberglass wool, Rockwool, PU sandwich panels will be suggested; If not, the metal steel sheets will be ok. The cost of the latter will be much lower than that of the former.
3.8 door quantity & size _____units, _____(width)mm*_____(height)mm
3.9 window quanity & size _____units, _____(width)mm*_____(height)mm
3.10 crane needed or not If yes, _____units, max. Lifting weight____tons; Max. Lifting height _____m
){kind=link}