Steel Prefabricated Modular Cabin for Construction Site Camp
Prefabricated building / Prefab house is built with light steel frames and kinds of sandwich panels. Basically, there were 2types of prefab house systems: K-type prefabricated houses and T-type prefabricated houses.
The columns are double C section profile steel(K type) or Square tube (T type), and the rafter is pre-welded tri-angle beams. The roof and wall panels could be Rockwool, Fiberglass or EPS insulated sandwich panels with different thicknesses like 50mm, 75mm, or 100mm. Comprising with other components like light steel doors, Aluminum / PVC windows, gypsum board suspended ceiling, plastic floor leather, electrical system, and Sanitary facilities & plumbing, etc. to be a self-contained temporary house unit.
The K type prefabricated house is a modular building system, there were its standard dimensions, the width could be 5560mm, 6230mm or 7360mm, while the length could be N*K (K=1800mm), and the height could be 3P, 6P or 9P (P=950mm, 3P is single floor, 6P is two floors and 9P is three floors)
Technical Parameter of standard Prefabricated Building:
1. Wind resistance: Grade 11(wind speed≤111.5km/h)
2. Earthquake resistance: Grade 7
3. Live load capacity of roofing: 0.5kn/m2
3. External and internal wall heat transmission coefficient: 0.35Kcal/m2hc
4. First floor load capacity: 150 kg/m2
5. Live load of corridor is 2.0kn/ m2
6. Four skilled workers can finish installation of 100sqm in 8 hours for the light steel structure.
7. Most components of the house are recycled, so the shelf life is over 20 years without any building garbage.
8. We can design and produce the house according to customer's request.
9. We can provide the service of installation, supervision and training by extra.
Prefabricated housing dormitory
· Self-built prefabricated engineering houses are used as dormitories with no more than 2 floors. The appearance of the dormitory requires a blue roof, white walls, blue stairs, and blue doors and windows. ·The dormitory doors and windows are made of plastic steel or aluminum with broken bridges, and the door and window frames are blue. ·There should be a guide sign on the wall or entrance of the house indicating the words "dormitory area" or "living area". ·The dormitory should ensure that there is necessary living space, the per capita use area is not less than 2.5 square meters, the indoor clearance height is not less than 2.5m, the channel width is not less than 0.9m, and the number of occupants in each dormitory should not exceed 8. ·The fire control of the dormitory area must strictly meet the relevant regulations.
Canteen on site
·The distance between the canteen and the toilets, warehouses and other rooms is not less than 15 meters, and it should not be set on the leeward side of the pollution source. ·The canteen should be a single-layer structure, and the ceiling should be suspended. The materials used in the decoration of the canteen must meet the requirements of environmental protection and fire protection. ·The canteen must be equipped with a washing tank, a disinfection tank, a cleaning tank, and a grease trap, and the grease trap must be dug regularly.
Prefabricated house shower room ·A sufficient number of showers should be installed in the shower room, the ratio of showers to employees should be 1:20, and the shower spacing should not be less than 1 meter. ·The shower room should be equipped with clothes hooks, clothes hangers or wardrobes. ·The floor of the shower room should be made of non-slip tiles.
Prefab house toilet room ·The size of the toilet room should be determined according to the number of workers on the construction site. ·The toilet must have flushing facilities, the floor of the toilet should be covered with non-slip tiles, doors and windows should be complete, and measures should be taken to prevent mosquitoes and flies in summer. ·The setting of toilet seats should meet the requirements of a squatting pan for every 20 people in men's toilets, a squatting pan for every 10 people in women's toilets, and a 1-meter long urinal trough for every 50 people in men's toilets. ·The distance between squatting pans should not be less than 0.9 meters, partitions should be set between squatting positions, and the height of partitions should not be less than 0.9 meters.
Henan K-home Steel Structure Co.,Ltd is located in Xinxiang, Henan Province. It is a self operating private enterprise, established in the year of 2007,registered capital RMB 20 million, cover an area of 100,000.00 square meters with 260 employees. We are engaged in design, project budget, fabrication, installation of steel structure and sandwich panels with second-grade general contracting qualification. Our main products covered sandwich panels, OEM prefab house, container house, construction material, light steel structure house, light steel villa, non-standard design house, steel structure projects, and installation service.
FAQ? Q1. What products do you offer?
A1. We focus on prefabricated houses, such as labor camp, container house, steel structure warehouse, modular villa for more than 12years.
Q2. What is your payment term?
A2. Our payment term: For standard products 30% deposite, the banlance should be paid before delivery. For Customized products, will depend on the design.
Q3. What is your MOQ (minimum order quantity)?
A3. For standard products, we don't have MOQ quantity.
Q4. How is your after-sales service?
A4.1. 24 hours available after-sales service.
2. For the installation, we will offer installation drawing and videos, if any questions we can reply in time. We can also can send our engineer to guide local workers, but you have to charge the double ticket, accommodation, food and salary.
Q5. What information should we offer before you quote?
A5.1. You have the drawing, pls give us and tell us the material you use.
2. If no drawing, pls tell us the usage and the size of the house, then we design for you with the good price.
Audited Supplier 
){kind=link}